www.vistacnc.com
- 8 -
www.vistacnc.com
- 8 -
iMach
III
P1A-S Pendant Manual v4.0.0
□
Feed Rate Override percentage.
□
Feed Rate Override, Unit/Min.
2.6 SPINDLE SPEED mode
In S% mode, turning MPG changes spindle speed overridden rate from 1% to 250 %. Spindle speed
can be changed when the spindle is running
.
□
Spindle Speed RPM.
□
Spindle Speed Override.
□
Current pulley number.
Check
in Plugin Configuration Table to display Spindle RPM.
3.
E-Stop switch button
5.1
E-Stop switch button in P1A-S model
Press E-STOP switch button to send out E-Stop signal to Mach3 application and activate
Emergency Mode in Mach3.
When the button is pressed, the switch is locked down. Twist the button to reset the button and
reset E-STOP.
