19
5) White Pixel
Det Exe: Press Enter button to start the
White Pixel Compensation mode.
ENT to Adj: Press Enter button to start White Pixel Compensation mode.
Proc: Process is running finding the white pixels. ( Please wait)
Done: Process ended
Det Count: Results of white pixel detection.( the number of white pixels)
Func: Select erasing white pixel function On/Off using the Left and Right buttons.
Det Level : Select the judgment level of white pixel using the Left and Right
buttons (1~16)
Det View: Set to on will display detected white pixels.
6) Day/Night
Mode: Select D&N mode.
Auto: Filter operates automatically relative to AGC level.
Day: The camera outputs the video image in colour only.
Night: The camera outputs the video image in black and white only.
Ext: The camera switches from Colour to mono on the input from an
external switch such as a Photo-cell. (Grey and Black)
Night Mode : Select B/W Burst On/Off
Delay(s): Adjust the delay before switching when D&N mode is Auto (1-60 sec).
D>N Level: Select switching level Day to Night when D&N mode is Auto (0-15).
(The lower the number the darker the image before switching)
N>D Level: Select switching level Night to Colour when D&N mode is Auto (0-15).
(The higher the number the brighter the picture before switching)
<Bottom Line Menus>
When user entered in main menu and sub-menus, following menus will be appeared.
I.
Main Manu (menu in bottom lines)
A.
Exit: Save & Exit.
B.
Load: Load Default Value.
II.
Sub Menu (menu in bottom lines)
A.
Return: Return to previous menu.
B.
Exit : Save & Exit
1) Exit Menu
Save & Exit: Save the current settings.
Exit: Exits without saving any changes.
2) Load Default Setup
Yes: Loads the factory default settings.
No: No operation, and return to previous menu.
