16
5) Frame Control:
Select term of refresh rate for output video. This function is useful to
reduce the recording to data storage.
Func: Select frame control mode to ON/OFF, and Auto.
Auto mode: When motion is not detected, the video output is being
refreshed in the programmed interval. When the motion is detected,
output video is switched to real time video.
ON: Always refresh in configured interval.
OFF: Always real time video.
Renewal (sec): Selects the interval between two frames.
Note: It may take a short time from motion being detected to switching to real time video
6) ScnChg/Unfoc:
Select Scene Change/Unfocus detection On/Off.
If the image that the camera is viewing changes, e.g. goes out of focus or moves.
(This could be caused by tampering or spraying with paint. An On Screen
message will be displayed.
This function is linked with the alarm out
In low light environments, the accuracy will be reduced.
In very low light environments, the function will not operate.
The function ignores moving objects.
