![Vista VVRD28V12DN-650 Installation Manual Download Page 13](http://html1.mh-extra.com/html/vista/vvrd28v12dn-650/vvrd28v12dn-650_installation-manual_1033678013.webp)
13
Motion Trace: When selected it will
„box‟ the moving objects.
Tracks an object through a scene and generates an alarm.
Face Trace: Face Trace mode on.
Tracks a face through a scene and generates an alarm.
Sens Down: Lowering the value allows for wider judgment on facial
recognition. (0~127)
Min Size: Minimum face size configuration (If this is set to 0 then no faces
will be detected).
Please be aware the facial recognition function is not 100% accurate and can produce
false alarms or miss faces being captured. Not recommended for as a primary alarm
source.
Mine: Up to 4 areas of interest can be set. If motion occurs an alarm can be
generated
Set Mine: Press the Enter button to Set Mine mode.
< >: Move the Mine Zone move using the Left and Right buttons.
UP: Sets the min in the required position.
DN: Clears the position of the mine
ENT: Press Enter to leave the Set mode.
Clr All: Press the Enter button to clear all mine positions.
Display: Select Mine Display On/Off. To show cross hairs of mine position
Absent: Selecting the absent mode will produce alarms ands on screen displays
when an static object is removed from the scene or is placed in the scene
Sens Down: The lower the number the more sensitive the function is.
Alarms time out after a set period
In low luminance environment, the accuracy is reduced.
If the object is too big, the accuracy is reduced.
Cross: This will count the number of movements from one zone to another in one
direction.
Zone: Use the right arrow to select either Zone 1 or 2, the relevant zone
will flash for a short period.
Size: Adjust the size of the selected zone.
Posi: Adjust the position of the selected zone.
Direction : Select Crossing direction 1>2 or 2>1
Alarm Cnt: Set alarm out cross count. The alarm will be activated after
this number of counts.
Reset Cnt: Manually resets the count to Zero. The count will
automatically reset after the Alarm count is reached