VK2-1080BIR35V16e User manual V1.0
65
3.8 Resetting to the factory default settings
To reset the VK2-1080BIR35V16e to the original factory settings, go to the Setup>System
>Maintenance
web page (described in “3.5.6 System>Maintenance” of the User’s Manual) or use the
Reset button on the network camera, as described below:
Follow the instructions below to reset the VK2-1080BIR35V16e to the factory default settings using the
Reset button.
• Using the Reset Button
Follow the instructions below to reset the VK2-1080BIR35V16e to the factory default settings
using the Reset button.
1. Switch off the VK2-1080BIR35V16e by disconnecting the power adapter.
2. Press and hold the Reset button while reconnecting the power.
3. Keep the Reset button pressed during about 2 seconds or more than.
4. Release the Reset button.
5. The VK2-1080BIR35V16e resets to factory defaults and restarts after completing the factory
reset.
Caution:
When performing a Factory Reset, you will lose any settings you have saved.
(Default IP 192.168.30.220)
