Vista VK-C402DN, Install And User Manual

Page: 39 / 58

30
Motion Detection Setting
Motion information is processed by splitting the screen into 64 areas. Each area can be selected by
clicking with the mouse, and green point shown in the selected area. The area which uses the
motion information as an event is shown green point, while the area which does not use the
information is indicated empty.
□ Enable: Check this item when using the motion information.
Sensitivity
This sets up the sensitivity for the motion detection.
Motion dwelling time
This sets up the event dwelling time when a motion occurs. This can be set in the range of 0 ~ 6
seconds. When an event occurs, the motion icon at the upper right blinks in red for the preset time
period. When another motion occurs during the motion event, the dwelling time is extended on the
basis of the occurring time of the second event.
Enable down FPS
This feature decreases frame rate to about 1 FPS when motion is not present, when a motion event
is detected the frame rate is increased to user defined rate setup in VIP Kit client camera set up
section.
Alarm Out Setting
When motion is detected as well as increasing frame rat the system can: send e-mails to defined
users or images to an FTP site.