59
▼
RTP
Have a setting for sending and receiving an audio or video on a real-time basis. These
settings are the IP address, port number, and Time-To-Live value to use for the media
stream(s) in multicast H.264 format. Only certain IP addresses and port numbers should be
used for multicast streams. For more information, please see the online help.
• Port Range
-. Start port - Enter a value between 1024 and 65532
• Multicast
This function is for sending Video and Audio to Multicast group.
-. Enable Multicast - Check the box to enable multicast operation.
-. Multicast destination IP - Enter an IP between 224.0.0.0 and 239.255.255.255. Although
it is empty, an IP will be entered automatically.
-. RTP port: Enter a value between 1024 and 65532.
-. RTP TTL: Enter a value between 1 and 255. If a network status is smooth, enter a lower
value. On the other hand, if a network status is poor, enter a higher value. When there
are many Network Cameras or users, a higher value may cause a heavy load to the
network. For a detailed setting, please consult with a network manager.
