12
Heater Kit Installation
1. Place the heater element is slot “A”. Please ensure that the cables are facing upwards
and the heater is pointing towards the Dome.
2. Place the PCB in slot “B”. Please ensure that the PCB is facing inside of the Dome with
the connection blocks at the top.
3. Place the plug in the Socket “C” (J3) which is found on the controller board.
• Cheater (IF Applicable)
Power Supply
24VAC
12DCV
Power Consumption
20Watt
10Watt
Heater On
at 41°F (5°C)
Heater Off
at 59°F (15°C)
• Power
Use Certified/Listed Class 2 power source only.