7
2
— Installation and Configuration
2.1 Package Contents
Installation of the camera must be performed by qualified service personnel in accordance with all
local and national electrical and mechanical codes.
Carefully remove the camera and its accessories from the carton and verify that they were not
damaged in shipment.
The contents of the package includes:
1. Camera 2.This manual 3. Template sheet 4. Accessory pack
2.2 Camera Overview
THERE IS TRANSIT TAPE HOLDING THE TILT CASING, THIS MUST BE
REMOVED BEFORE POWERING UP
– FAILURE TO DO SO WILL
DAMAGE THE MOTOR
DO NOT ATTEMPT TO PAN OR TILT THE CAMERA BY HAND, YOU
WILL DAMAGE THE MOTORS
The camera supports AHD, TVI and CVBS from the BNC output and is defaulted to TVI. Access to
the OSD and lens control is only via TVI and AHD, there is no CVBS coax control.
NOTE: Open the cover and change the video output setting.
NOTE: THE COVER IS A PRIMARY
SEAL, FAILURE TO REPLACE WILL RESULT IN MOISTURE / PARTICLE INGRESS.
You can set video signal with S1.
S1
Left
Center
Right
AHD Output
TVI Output
CVBS Output
Summary of Contents for VEFED28V12MHDAW
Page 2: ...2...
