15
4.2 Line Drawing / Dimensions
All dimensions are in mm
5
— Warranty
This camera is subject to the warranty conditions valid at the time of purchase. The exception to
this and not covered by warranty is:
Powering up the camera with the transit tape applied to the tilt mechanism
– this must be removed
prior to powering the camera up otherwise damage will occur to the motors.
The camera must only be moved via coax telemetry, any attempt to move the tilt or pan function by
hand or force will damage the motors.
The switch cover on the camera is a primary seal, failure to refit / refit correctly, will expose the
camera to moisture and particle ingress.
Continuous Pan / Tilt / Zoom. The motors and the lens are designed for set up and periodic
adjustment only, not permanent usage.
Summary of Contents for VEFED28V12MHDAW
Page 2: ...2...
