23
Quantum Plus installation and user manual
title green. Use the left and right arrows to select the character position and use the Alpha-
numeric keys to select the character ( Similar to SMS on a mobile phone). When complete
press the select key to exit.
Alternatively use the mouse to select the title to alter, the on screen keyboard will appear,
enter the title followed by the OK button.
1-4. Spot Setting
<Single Screen> <Quad Screen>
<9 Channel Divisions> <16 Channel Divisions>
Spot output is used to configure the second monitor output. The Spot monitor can respond to
Alarms, Motion, Audio, or can be configured for full or multi-screen sequences.
Use the Select key to turn the Mode box from Blue to Green, use the up and down arrows to
select the mode between multi-screen options; Alarms, Motion or Audio.
Once the mode has been selected, you can select either a duration or On/Off option (Mode
dependant). Use the Select button to turn the box from blue to green then use the Up and
Down keys to alter value. Press select to turn back to blue.
Alternatively, use the mouse to select mode by repeatedly clicking in the Mode box. Then
select the duration or On/off for each channel.
Summary of Contents for QP04-XXXhf
