26
Quantum Plus installation and user manual
2. RECORDING
All recorded data is watermarked to ensure that it is not tampered with. Using the software
supplied the legitimacy of this data can be verified.
2-1. Global
Watermarking
Generally this should be set to on, this allows the supplied software to verify the downloaded
information to ensure it has not been tampered with or changed.
HDD Overwrite
Generally this should be set to on to ensure that the DVR does not stop recording when the
hard drives are full.
Quality
The amount of compression applied to the recording can be changed between Best, Good
and Standard.
Alarm Mode
Exclusive = Will only record the cameras in Alarm
Normal = Alarmed cameras will record at the settings in the Alarms / Motion or Audio Events
record set-up pages in the RECORD section of the main menu.
Non-Alarmed Resolution
This is the resolution that the unit will record the cameras that are not in alarm, during and
Alarm event (Alarms / Motion or Audio) this can be set to CIF, 2CID or D1
Non-Alarmed FPS
This is the number of pictures per second that the unit will record the cameras that are not in
alarm mode.
Summary of Contents for QP04-XXXhf
