–
1. To store a preset position
Move the camera to the required position then press the record key
followed by the number key
of the preset to be stored (1
– 9)
2. To recall a Preset
Press the search key
followed by the number (1 -9).
To run Tour 1, press the search key
followed by the number 0 (Zero). The tour requires a
keyboard to set it up in the domes menu.
Camera selection
The PTZ cameras can be controlled in either full screen or split screen mode. If in full screen mode
press the camera selection key
, the camera icon will step from one camera to the next on the split
screen. When the icon appears on the camera to be controlled then press the PTZ key
.
If in full screen mode then simply press the PTZ key
.
Pan and Tilt control
To move the dome left / right / up or down use the arrows keys