Vista QNVR04P Installation And User Manual Download

Page: 45 / 87

QNVR_PoE 4 and 8 channel manual V1.0

QVNR04P/08P installation and user manual

Start/End Time : Enable to send e-mail notifications only for events that occur within a

specified range of time.

Send Test Mail : Enable to send a test E-mail to the addresses so allowing the installer to

verify if the setup is correct

SMTP Mode

The SMTP (Simple Mail Transfer Protocol)

function allows e-mails to be sent over a LAN

The default is SMTP Mode

“OFF”.

In order to activate SMTP Mode, choose SMTP Mode either IP or Domain first.
Then, put ID, Password, IP address, and port.
Finally press

“SMTP Status Check” to test.

5-2. E-mail Out

As well as e-mail on event activations the NVR can be set to send a report on the following
occurrences: Video Loss; Alarm; Motion: Power Loss and Smart (Hard disk monitoring).

The video loss, alarm, motion can be set each user, channel.
Press the Set box and tick the box.

Summary of Contents for QNVR04P
























































































Search results

Summary of Contents for QNVR04P

Reviews:

Related manuals for QNVR04P

Brands by name

Popular brands

Vista QNVR04P, Installation And User Manual

Search results

Summary of Contents for QNVR04P

Reviews:

Related manuals for QNVR04P

Brands by name

Popular brands