29
QNVR_PoE 4 and 8 channel manual V1.0
QVNR04P/08P installation and user manual
At first, the IP address of cameras
should be changed because it does
not correspond to the IP address
range of LAN. You can set the IP
address automatically or manually.
Press
“Auto IP Set” button to change
the IP address automatically.
If you want to change the IP address
manually, click the display area of IP
address. The keyboard will appear,
enter the IP address.
Press
“Apply IP Set” button after finishing the IP set.
You can assign the channel number
each IP camera.
Click the display area of channel, the
pop-up menu will appear. Select the
channel number and press
“Accept”
button after finishing the channel
numbering.
[ Setting the Parameters of IP camera ]
Most of IP camera parameters are set automatically, but you can change the parameters
when they are not correct.
Enter IP camera parameters. This
includes the IP address, HTTP port,
RTSP port, Protocol, live stream, ID,
password of the IP camera. It can
support OnSIP IP cameras.
If you want to disconnect to the IP
camera, click the
“Connected” to
configure next to the Status
label and
it will be changed to the
“Disconnected”.