Vista QNVR Installation And User Manual Download

Page: 43 / 91

QNVR Installation Manual V1.1

QNVR installation and user manual

3-2. Disk

Format

Formatting of the drive is used when new drives are installed or you need to wipe all
information on the disk.
Click on OFF to turn to ON, then click on Execute, click YES, to confirm

E-SATA Function

This allows the E-SATA port on the rear panel to work as the port for storage(Internal HDD)
or backup(Manual Archive).

Smart

This function is used to keep a check on the health of the Hard disk. The parameters which
can be monitored are:



Read/Write errors on the drive



Drive temperature.

Smart : Turn to on to enable feature
Temperature : Using the on screen keyboard set the temperature at which the warning is

to be reported. (recommended setting 45

℃

)

Message : The message box can be turned on or off to give a visible warning.
Alternatively and E-mail; can be sent if any problems occur.

Summary of Contents for QNVR




























































































Search results

Summary of Contents for QNVR

Reviews:

Related manuals for QNVR

Brands by name

Popular brands

Vista QNVR, Installation And User Manual

Search results

Summary of Contents for QNVR

Reviews:

Related manuals for QNVR

Brands by name

Popular brands