VBR (Variable Bitrate):
In VBR mode both Max BR and Target Quality applies, so select the
Max BR value and Target Quality value you want for both Fisheye and
PTZ Streams, then click 'set' button to the right to save this setting.
View
VBR Max BR
Target Quality
Full-Res Fisheye Control 10000kbit/s (default)
70 (default)
PTZ Streams Control
2000kbit/s (default)
70 (default)
Range selectable
50 - 12000kbit/s
50 - 90
In VBR the camera encodes at the Target Quality unless the size of the
encoded data is greater than the Max BR. It then temporarily reduces
the image quality to keep under the maximum bit rate. Once quality is
below a set level, the encoder drops frames to keep within the Max BR
figure.
Misc Settings
Flicker Frequency:
Off / 50Hz / 60Hz
Disable Status LED:
Tick box to disable the LED
Auto Lowlight:
Tick box to enable automatic colour/monochrome switching
Gamma:
Use the drop down box to select the level:
0.5 / 0.6 / 0.7 / 0.8 / 0.9 / 1
