CONNECTING TO THE ECLIPSE
2
The Eclipse
2
is defaulted with DHCP enabled. If no DHCP server is
present on the network, the camera will use the default IP address of
192.168.1.100. To communicate with the camera, a suitable PC or
laptop computer is required (see minimum PC spec on page 1), which
has been enabled to use the appropriate subnet, together with a
browser such as Firefox or Internet Explorer.
On the browser address bar, simply type in the IP address of the
camera. A username and password will be required to access the
camera, by default these are:-
Username: Admin
Password: Admin
Or:
Load the Eclipse
2
utility from the disc onto your PC / Laptop:
1. Run the program
2.
Click the ‘Rediscover’ button
3. Highlight the Eclipse
2
you wish to connect to
4.
Click ‘Connect’
5. Your PC / Laptop default web browser will then connect
