Vista 0150-0267A, User Manual

Page: 38 / 46

Vista Solo 6-2 0150-0267A
Setting the Clock
The following table shows the command sequence for setting the clock:
Command 1 2 3 4 5 6 7 8 9 10
Value 02 43 4C 4B 20 y1 y2 2D m1 m2
Command 11 12 13 14 15 16 17 18 19 20
Value 2D d1 d2 2C h1 h2 3A f1 f2 03
This grey cells in the Value row of this table indicate the correct positions for each byte of data in the
command string.
Place the hexadecimal value of the desired ASCII character into the command string. Enter a two-
digit value for the Year, Month, Day, Hour, and Minute into the command string. Each digit is a
separate byte. Use the last two digits of the year for the year value (For example, 2001 is entered as
01). Time is always designated in Military Time.
Example
In this example, 14:39 on December 25, 2000 is used to demonstrate the Set Clock Command String.
Notation Used in
Value Column
ASCII Character of
desired Value
Hex Value entered into
command string.
Year Character #1 y1 0 30
Year Character #2 y2
0 30
Month Character #1 m1 1 31
Month Character #2 m2
2 32
Day Character #1 d1 2 32
Day Character #2 d2 5 35
Hour Character #1 h1 1 31
Hour Character #2 h2 4 34
Minute Character #1 f1
3 33
Minute Character #2 f2 9 39
The final Set Clock Command String for 14:39 in December 25, 2000 would appear as follows:
Command 1 2 3 4 5 6 7 8 9 10
Value
02 43 4C 4B 20
30 30
2D
31 32
Command 11 12 13 14 15 16 17 18 19 20
Value
2D
32 35
2C
31 34
3A
33 39
03