Vista 0150-0267A, User Manual

Page: 32 / 46

Vista Solo 5-2 0150-0267A
o
Advanced Menu
→
Disk Overwrite Mode
→
Overwrite Once
Physical
Start of Disk
Unit Stops
Recording
when this point
is reached
Previously
recorded data
overwriten
New recorded
data
Functions of Overwrite Once mode:
•
Recording always starts at end of
last recording.
•
The unit overwrites all previously
recorded data.
•
Recording stops before the unit
overwrites any of the newly recorded
data (data from the current record
session).
•
When the end of the disk is reached,
the unit displays an on-screen
message indicating that the disk is
full, and the unit has stopped
recording. User must acknowledge
the on-screen message by pressing
the
Enter button.
•
The unit will continue recording
again when the user presses the
Record button.
Overwrite Once Mode
o
Advanced Menu
→
Disk Overwrite Mode
→
Continuous Overwrite
Functions of Continuous Overwrite mode:
•
Recording always starts at end of
last recording.
•
The unit overwrites all previously
recorded data.
•
The unit overwrites newly recorded
data (data from the current record
session).
•
Unit never stops recording.
•
Record Capacity display will not
count down.
Previously
recorded data
overwriten
New recorded
data overwriten
Unit records over
all recorded data
Continuous Overwrite Mode
5.2 Advanced Menu
→
Disk Maintenance
Delete Disk
Undelete Disk
Erase Disk (Permanent)
The user can have previously recorded information:
•
Deleted (with the possibility of restoring it).
•
Undeleted (restored if it has not yet been overwritten).
•
Erased (removed with no possibility of restoring it).