VISSONIC Electronics Limited
Page 16
When the following interface is displayed, choose to restore the factory settings and select a conference room.
Then, press the microphone on/off button
and wait for reconnection.
3.8 Configuring SSID and changing a conference room
When multiple wireless conference systems are used in the same building, you need to set different SSIDs for the
conference systems.
Step 1 Connect the LAN port of the AP through a network cable, and connect the POE/LAN port to the AP port on
the rear panel of the host.
Step 2 Open "Change adapter options" in "Network and Internet settings" on the computer. Right-click the Ethernet,
choose "Properties", and click "Internet Protocol version 4 (TCP/IPv4)". Click "Properties" and set the same IP
network segment for the PC and AP. The default IP address of the AP is 192.168.2.1. For example, the network
properties of our PC are shown in the figure below.
