4.6.4 logo/OSD information/time setting/additional OSD
Figure 26 Corner LOGO
Introduction
1) Corner LOGO-
The insertion of the corner LOGO is divided into PGM / PVW insertion in the
single-conduction mode and PGM2 insertion in the dual-conduction mode. As shown in Figure 26, the
maximum number of supported logo inserts for the PGM and PVW or PGM2 channels is eight. The four
buttons "1", "2", "3", and "4" correspond to the upper left, upper right, lower left and lower right corners
respectively. 5-8 The default position of the button is the same as above. You can change the insertion
position of the logo file in the upper right corner of the setting icon
. You can also customize the image
of the angle marking here. The standard picture format is png, the best The resolution image size of the
effect image is 200 * 100.
Figure 27 OSD information
2)OSD Information-
OSD information is mainly conference information or other recording information. For
example, the user can customize the course name, class teacher name, class specific time. The OSD information
is inserted into the corresponding interface and displayed in the lower right of the screen. Same as the corner
LOGO setting, in the settings on the font capitalization, font color, display background color, etc. to modify the
adjustment and if the application is not for classroom, but for conference room. You can change the OSD
template.
Summary of Contents for VIS-CRS02-A
