EACH DECORATIVE BRACE ON ALL FOUR CORNERS ARE MADE UP OF TWO PIECES.
BEGIN WITH THE RAFTER TAIL SUPPORT (DC 1672). PLACE IT TIGHT AGAINST THE
WALL PANEL FLUSH TO THE OUTSIDE CORNER AS SHOWN IN
DIAGRAM 1
. ALIGN
THE TOP EDGE FLUSH WITH THE TOP OF THE EXTENSION OF THE WALL FASCIA.
ATTACH WITH TWO 2 1/2" SCREWS INTO THE EXTENSION AND ONE INTO THE
CORNER PANEL AS SHOWN IN
DIAGRAM 1
.
PLACE THE BOTTOM RAFTER TAIL (DC 1670) TIGHT TO THE WALL AT THE TOP AND
FLUSH WITH THE TOP EDGE OF THE RAFTER TAIL SUPPORT AS SHOWN IN
DIAGRAM 2
. ATTACH WITH TWO 2 1/2" SCREWS INTO THE RAFTER TAIL SUPPORT.
DIAGRAM 1
DIAGRAM 2
2 1/2" ROBERTSON SCREWS
20 req
DC-1670
DC-1672
B
Mt. ORFORD
0041_Mt_Orford_11x14_Instructions_V1.1
TOLL FREE: 1-877-795-7423
EN
STEP 30
