12
Troubleshooting
Problem
Solution
Beverage cooler doesn’t work.
□
Check for power failure.
□
Verify unit is plugged into a standard power outlet and not a GFCI
outlet.
□
Check if control panel is on.
Beverage cooler is too cold.
□
Adjust thermostat to higher number.
Beverage cooler is not cooling
sufficiently.
□
Adjust thermostat to lower number.
□
Ensure door is closed properly.
□
Ensure the door gasket provides a proper seal. If you can slide a
piece of paper between the gasket and unit body, the gasket is
not sealing properly.
□
Unit may not have enough ventilation space around it.
□
Check if the sides of the unit are warm. If not, please contact
Vissani Customer Service.
□
Do not put hot beverages in the beverage cooler.
Beverage cooler compressor runs for
long periods.
□
Hot weather and/or frequent door opening will force the unit to
work harder to keep cool.
□
Do not overload the beverage cooler.
Beverage cooler door does not close
properly.
□
Unit may be tilted. Adjust front legs to level the unit.
□
Align the door using a 5/16-inch (8 mm) socket, adjusting the
screws under the triangular bracket cover. For assistance, please
contact Vissani’s Customer Service Department.
Side panel of beverage cooler is hot.
□
The unit exchange heats through the side walls; therefore, does
not indicate malfunction.
□
Usually happens when door is opened and closed frequently or
when operated in high temperature weather. Results from dis-
sipation of heat from within the unit. Do not touch the panel. Does
not indicate a malfunction.
Condensation forms on the glass door.
□
Condensation forms under conditions of high humidity; does not
indicate a failure. Wipe condensation with dry towel.
□
Relocate unit to a cooler area or adjust thermostat to a higher
setting to balance out the exterior and interior temperatures.
Condensation will dissipate as time goes on.
Sound of trickling water.
□
This is the refrigerant flowing. Does not indicate a malfunction.
Buzzing sound.
□
A buzzing noise is typically generated by the compressor when
starting up or shutting down.
Odor.
□
Unit may require cleaning.
