Notes:
1.
For UL/ULC listed installations see table 1 to set the correct angle when mounting at a height of 2.4 m (8ft).
2.
For UL/ULC listed installations the maximum range of the detection is 10m (33ft).
3.
For installation options to reduce the probability of false alarms from pets, see the grayed-in cells in Table 1.
4.
For EN installations only and the distance ranges between 11 to 12 m (36 - 39ft), set the PIR sensitivity to "One region".
Event counter: One region
Correct Installation
Incorrect Installation
A.
Mark drilling point
B.
Screw hole for wall tamper
C.
Drill
D.
Fasten
E.
Three long screws
F.
Two short screws
Note:
The 2 screw holes enable adjustment of the bracket on the wall, if needed, following the walk test.
Figure 2 - Installation
HORIZONTAL ADJUSTMENT (-45° to +45°)
VERTICAL ADJUSTMENT (0° to -10° in 2.5° clicks / steps)
D-304493 TOWER CAM PG2 Installation Instructions
2
