manualshive.com logo in svg

Visolux VB34, Instruction Manual

Share
Download
Visolux VB34 Instruction Manual Download Page 5

Barcode reader VB34

Table of contents and general information

Subject to reasonable modifications due to technical advances.

Copyright Fuchs, Printed in Germany

Fuchs Group • Tel.: Germany (06 21) 7 76-0 • USA (330) 4 25 35 55 • Singapore 7 79 90 91 • Internet http://www.pepperl-fuchs.com

Da

te

 of

 issue 

06/

1

3

/2005

3

Declaration of conformity

We, Fuchs GmbH, declare herewith at our sole responsibility that the 

Barcode Scanner VB34

and all models of this product to which this declaration pertains, are compliant with 
the following standards and other regulating documents 

EN 55022, August 1994:

RADIO INTERFERENCE OF INFORMATION 
TECHNOLOGY EQUIPMENT (ITE), MEASURING 
METHODS AND LIMITS

EN 50082-2, March 1995:

ELECTROMAGNETIC COMPATIBILITY, 
GENERIC IMMUNITY STANDARD PART 2: 
INDUSTRIAL AREA

and the guidelines of the following directive(s):

89/336 CEE AND SUBSEQUENT CHANGES MADE,
92/31 CEE; 93/68 CEE

Fuchs GmbH, in D-68301 Mannheim, has a certified quality assurance 
program in accordance with ISO 9001.

A corresponding declaration of conformity may be requested from the 
manufacturer.

Note

ISO9001

Summary of Contents for VB34









































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands