Static scanner OCD6000-F62-...
Product description
D
at
e of
ed
iti
on:
20
03
/0
7/
30
6
Subject to reasonable modifications due to technical advances.
Copyright Fuchs, Printed in Germany
Fuchs Group • Tel.: G49 621 776-0 • USA +1 330 4253555 • Sin65 67799091 • Internet http://www.pepperl-fuchs.com
Construction and function
The horizontal measurement range is approxi/- 40° with seven different seg-
ments.
The angle resolution within the measurement range is achieved by seven switching
transmitter diode pairs whose directions of measurement differ by 12°.
The transmitter diodes can be switched in eight predefined patterns that are referred
to as transmission patterns (see page 13, Command set). The detection range active
at any given time is derived from these patterns.
The receiver consists of a photo-diode array and has a fixed detection range of ap-
proxi/- 40° horizontally and +/- 6° vertically. There is no angle resolution in
the vertical direction.
Figure 2.2: Measurement range segmentation
The device has a half-duplex-capable RS485 interface. Using this interface, the de-
vice is capable of controlling with a defined command set and reading measured va-
lues.
The device measures the distance between the sensor and retroreflector at a selec-
ted angle segment. The distance measurement is performed based on the principle
of phase correlation.
The transmitter selection is made by control command and direction parameters
using the RS 485 interface.
LED 1 LED 2 LED 3 LED 4 LED 5 LED 6 LED 7
horizontal
beam pattern
(top view)
vertical
beam pattern
(side view)