12
Too much/little light
If a measurement is done with too little light a black cross will indicate
this and a red cross indicates too much light, as shown below. This cross
will also be shown on the LabFlicker device and a new measurement has
to be done, simply press the ‘Start/Pause’ button again.
If it is not possible to do a measurement within
the ‘OK’ range of the
LabFLicker and the cross will be showing in the display and on top of the
result in Light Inspector the result can still be saved, but the accuracy of
this measurement cannot be guaranteed.
You can choose to save this measurement or export it to PDF, but the
accuracy of the result cannot be guaranteed. In the PDF report the
black/red cross will not be shown.
Remember to save the measurement after the Flicker Window is closed
