UltraDecoder Operators Manual
Menu Navigation
Issue: 4
28
Ref: ULTD-ASUM-7001
Copyright © 2016 Vislink plc
This menu provides the facility to configure the date and time in the unit. The unit
contains an internal battery that will maintain the current time when it does not receive
external power.
This option allows for the time to be set in the unit.
This option allows for the date to be set in the unit.
This option allows for the date format to be configured to either dd/mm/yy or mm/dd/yy
(where dd represents the day, mm represents the month and yy the year).
This option displays the total amount operational of hours of the unit.
This option allows you to test the LEDs on the front panel. Each LED will cycle through its
colours, illuminating for each applicable state for the LED.
This option provides the facility to adjust the contrast of the display.
NOTE: Unlike all other options, changing this value cannot be cancelled by use of the
ESCAPE button.
This option provides the facility to perform a fault test of the unit. Any errors or warnings
reported are displayed on the Alarm page, which is accessed via the Status button.
Selecting this option reboots the unit.
To perform this action:
1.
Change the setting to YES.
2.
Press the ENTER button.
These menus provide information regarding the unit’s software versions, plus contact
details should you require help from our customer support. Please refer to the serial and
version numbers when contacting customer support.
This menu displays the physical serial number of the unit, the current build version of the
software and kernel version.
This menu displays the serial number and version of the internal decoder.
