UltraDecoder Operators Manual
Menu Navigation
Issue: 4
26
Ref: ULTD-ASUM-7001
Copyright © 2016 Vislink plc
This option provides the facility to load preset information from a previously saved file.
NOTE: Using this function will overwrite all the current presets stored in the unit (even if
the file only contains a subset of preset information).
To perform the recall:
1.
First ensure that a USB memory stick is inserted into the USB connector on the front
panel with the desired configuration.txt file.
2.
Select this item for editing,
3.
Change the value to Yes and press the ENTER button.
4.
When the display changes, requesting confirmation of the action, press ENTER to
confirm or ESCAPE to cancel.
This option provides the facility to download the unit’s configuration to a USB memory
stick.
To perform the store:
1.
First ensure that a USB memory stick is inserted into the USB connector on the front
panel.
2.
Select the item for editing.
3.
Change the value to Yes and press the ENTER button.
4.
When the display changes, requesting confirmation of the action, press ENTER to
confirm or ESCAPE to cancel.
This option provides the ability to restore the unit to its factory defaults.
To perform this action:
1.
Change the setting to YES.
2.
Press the ENTER button.
This option provides the ability to restore all of the unit’s IP Addresses to their factory
defaults.
To perform this action:
1.
Change the setting to YES.
2.
Press the ENTER button.
This section provides the facility to configure the Ethernet settings for remote control by
either SNMP or web browser.
