Advent Communications
209297 – DCU5000 Drive Control Unit
Page 22 of 42
Result – the response indicates that the command was not valid (the command sent
should have been GT200 as in the example above). The unit will not action this
command.
Error 2 – invalid parameters
Responds with current settings
Example
Command to set the transmit gain to -50.0dB.
The command is ‘GT’ and the valid range for the parameters is 000 to 400.
Command sent
GT500
Response from unit
GT200
Result – the response indicates that the parameters were not valid (-50.0dB is outside
the range for this unit). Response indicates that the current value is –20.0dB i.e. no
changes have been made.
Summary of Contents for ADVENT DCU5000
Page 3: ...Advent Communications EMC DECLARATION 209297 DCU5000 Drive Control Unit Page 3 of 42 ...
Page 41: ...Advent Communications 209297 DCU5000 Drive Control Unit Page 41 of 42 8 FIGURES ...
Page 42: ...Advent Communications FIGURE 1 DCU5000 LAYOUT 209297 DCU5000 Drive Control Unit Page 42 of 42 ...
