Page 1
Hi-Lite™ 30 LED contour tube specification & installation
v6 – June 2021
www.visivegroup.com
2 MONITORED OUTPUTS AT 46 Vdc / 2.6A
240W LED POWER SUPPLY UNIT
WITH CSC SAFETY CUTOUT
PS-S-240
Rev.B
E183223
E127738
IP67
MADE IN TAIWAN
1
1
1
1
1
6
6
2
2
3
4
4
4
4
5
5
Sample installation layout
Visive Group Limited
Ash Road South, Wrexham Industrial Estate, Wrexham, LL13 9UG +44 (0) 1978 660181
www.visivegroup.com
The installation
Hi-Lite™ 30 installations (see sample layout below) are made up from a number
of standard sections (1), connected end to end. A Field Adjustable Section (2) is
usually fitted at the end of each continuous run and is cut to size at the time of
installation to exactly fit the structure.
Pre-terminated connection cables (4) connect the Hi-Lite™ 30 sections to the
power supply (3), and are also used to bridge gaps around other signage or building
features. When the electrical connection must continue after an adjustable section
(for example around a corner), a ‘Y’ connection splitter (5) is used together with a
connection cable. Blanking plugs (6)
must
be fitted to any unused connectors at
the end of tube runs.
Installation key
1.
Standard Hi-Lite™ 30 sections available
in 2.4m (7’10½”) lengths.
2.
Field Adjustable Sections. Available in
2.4m (7’10½”) and 1.2m (3’11¼”) lengths.
3.
46V IP67 Power Supply Unit with CSC safety
system. Available in 240W, 96W, 40W and
20W versions.
Order code(s):
PS-S-240
PS-S-96
PS-S-40
PS-S-20
4.
Pre-terminated connection cables. Available
in 1m (3’3½”), 3m (9’11”), 5m (16’5”) and
10m (32’9¾”) lengths.
Order code(s):
JC2-S-1
JC2-S-3
JC2-S-5
JC2-S-10
5.
‘Y’ connection splitter.
Order code(s): YC2-S-FMM
6.
Connector blanking terminator (supplied with
power supplies).
Order code(s): HL-BLANK
