1
1. Description
3. Specification
The device is a standalone access control and proximity card
reader which supports EM & MF card types. It builds-in STC
microprocessor, with strong anti-interference ability, high
security and reliability, powerful function and convenient
operation. It’s widely used in high-end buildings, residential
communities and other public places.
• Ultra-low Power: Standby current is less than 30mA
• Wiegand Interface: WG26 or WG34 input and output
• Searching time: Less than 0.1s after reading card
• Backlight keypad: Operate easily at night
• Doorbell interface: Support external wired doorbell
• Access ways: Card, PIN code, Card & PIN code, Mobile App
(Tuya)*
• Independent codes: Use codes without related card
• Change codes: Users can change codes by themselves
• Delete users by card No.: The lost card can be deleted by
keyboard
*The mobile app only OPENS and CLOSES the door via Wi-Fi.
It DOES NOT HAVE reports, events, and other features
.
• Working Voltage: DC12-24V
•
Standby Current: ≤30mA
• Card Reading Distance: 2~5cm (0.79~1.97in.)
• Capacity: 2000 users
• Working Temperature: -49°C ~ 60°C (-40°F ~ 140°F)
• Working Humidity: 10%
~
90% RH
•
Lock output load: ≤3A
• Door Relay time: 0
~
99S (Adjustable)
2. Features
Drill hole according to the size of the device and fix the back shell
with the equipped screw. Thread the cable through the cable hole.
Connect the wires according to your required function, and wrap the
unused wires to avoid short circuit. After connecting the wire, install
the machine.
4. Installation
