V
ISIONEER
®
R
OAD
W
ARRIOR
4D
M
AINTENANCE
22
S
CANNER
U
SER
’
S
G
UIDE
C
LEARING
P
APER
J
AMS
If your scanner stops scanning due to a paper jam, a warning opens after a few moments.
WARNING: do NOT attempt to remove the jammed page with the scanner closed. Damage to the
scanner will occur if forcing the page out of the scanner. Follow the instructions below to remove the
jammed page.
1.
Place your thumbs on either side of the paper feed slot, underneath the lid of the scanner. Hold the scanner
sides firmly and pull the scanner lid up to release it from the body of the scanner.
Use both hands to open the scanner, the lid is held down with locking arms on both sides of the paper feed
slot. If you open only one side, you may damage the scanner lid.
2.
Remove the jammed paper and close the cover.
Gently close the scanner lid. Press down on both sides of the lid until you hear a click as the arms lock the
scanner lid in place.
To reduce the number of paper jams, smooth and straighten the paper before scanning, and insert the paper
evenly into the scanner.
C
LEANING
THE
S
CANNER
Clean the inside of the scanner to remove dust and paper debris from the scanner glass, pickup and feed rollers.
Cleaning the inside of the scanner helps to keep your scanner operating at optimum performance. Dust
accumulation on the rollers will prevent documents from feeding straight through the scanner, dust on the
scanner glass will appear as lines in the scanned image.
