5. Actuators control other actuators
6. Remote controls send signals to static controllers to trigger scenes or other actions
7. Remote controls control other actuators.
There are two different role a controller can have. There is always one single primary controller that is managing the
network and including/excluding devices. The controller may have other functions - like control buttons - as well. All other
controllers don't manage the network itself but can control other devices. They are called secondary controllers. The
image also shows that its not possible to operate a sensor just from a remote control. Sensors only communicate with
static controllers.
Product description
The siren will warn everybody in the building by a loud sound and a flashing light about an alarm. This
product is especially suited for security applications in combination with other Z-Wave devices such as door
or windows sensors or motion detectors. The siren gives a loud sound and a flashing warning light, so that
everybody in the building will know immediately that an alarm has occurred. The device can be configured to
either use the strobe flash or the acoustic siren or both. A tamper switch protects the device from removal or
manipulation if used in security applications. The device is battery powered by 4 AA standard batteries.
Batteries
The unit is operated by batteries. Use only batteries of correct type. Never mix old and new batteries in the
same device. Used batteries contain hazardous substances and should not be disposed of with household
waste!
Battery Type: 4 * AA
Installation Guidelines
1. Remove the bracket from the siren by pressing the locking tab and then gently slide up the siren.
Observe the correct polarity before insert the batteries.
2. Using the screws or adhesive tape to affix the bracket on the chosen location.
3. Slide back the cover and screw fastening with the front cover, the LED should go off.
Please note:
LED setting light will flash continuously in Exclusion condition.
ZM1602 can only connect to DC 12~39V, AC 9~28V Power adapter.
ZM1602 is extremely LOUD, please do not near your ear when you test!
(c) 2012 Z-Wave Europe GmbH, Goldbachstr. 13, 09337 Hohenstein-Ernstthal, Germany, All rights reserved, www.zwaveeurope.com - pp 2