Vision VE-810, Operation Manual

Page: 5 / 69

Chapter 1 - Before You Begin 5
Chapter 1 - Before You Begin
Introduction
About This Manual
This manual is designed to provide you with information about your Vision VE-810—
VE-810XD engraver, beginning with unpacking the machine and continuing through
installation and lifetime machine maintenance. This manual does not attempt to teach
you how to engrave, how to use a computer or how to use your engraving software.
Some previous knowledge of engraving terms and the engraving process is assumed.
For information on the Vision Engraving Software, see the Vision Engraving
Software manual.
For more information on your individual computer system, see your
computer’s user manual or contact your computer distributor.
Safety
Safety Precautions for the VE-810 Engraver
¾
Keep hands clear of the bottom of the spindle during operation.
¾
Always stop the machine before making any adjustments.
¾
Do not operate the machine with the covers removed.
¾
Wear safety glasses when cutting any materials that emit chips.
¾
Use extreme caution when inserting or removing cutters.
¾
Before any servicing, disconnect the power cord.
¾
To avoid electric shock or equipment damage, ensure that the control unit is
connected to the appropriate electrical source as noted in the installation procedures.
¾
Never operate the equipment with damaged or frayed power cords, loose connections,
or exposed extension cords where someone can step on the cord and create a tripping
hazard.
¾
Be sure to hold the plug, not the cord, when disconnecting the controller from an
electrical socket or power source.