Vision VE-810, Operation Manual

Page: 33 / 69

Chapter 3 - Operations 33
B1 - The B1 button only works when using the Vision Software Program. When you press
this button, the controller will re-engrave the previously engraved job. If you press this
button while a job is engraving, the table will return to the home position and wait for you to
press the START button to re-engrave the job.
NOTE: The B1 button does nothing when using the Vision-PRO Software.
B2 - The B2 button only works when using the Vision Software Program. When you press
this button while a job is engraving, the table will backup one character. Each time you
press the B2 button, the table will move back another character until it reaches the first
character of the job. You will need to press the START button to resume engraving from
that point.
NOTE: The B2 button does nothing when using the Vision-PRO Software.
B3 Button - The B3 button only works when using the Vision Software Program. When you
press this button while a job is engraving, the table will backup one line. Each time you
press the B3 button, the table will move back another line until it reaches the first line of
the job. You will need to press the START button to resume engraving from that point.
NOTE: The B3 button does nothing when using the Vision-PRO Software.
4th AXIS Button - This button allows for a rotary axis to be used. This is for the optional
pen rotary attachment.
PROX ON/OFF Button - This button allows you to turn the Proximity Sensor on and off.
The Prox allows the spindle to sense where the surface you are engraving is. This feature
works when engraving with a nose cone or diamond drag only; it is not designed for non-
nosecone engraving. When the light is green, the Prox is on, when its red, the Prox is off.