[4] Viewing Alarm Memory
+ 4
A blinking Memory LED or Zone Indicator LED while the panel is armed, or a lit Memory
LED while the system is disarmed, indicates that an alarm occured during the most recent
arming period. Press + 4 while the system is disarmed to view the first alarm of the
arming period. Press 4 again to view each additional alarm of the arming period. A long
beep tone indicates there were no additonal alarms. Press to clear the memory or
arm and disarm the system. Press to return to the system’s HOME Mode.
#
Clear
AC LED indicator will light if AC power to the security system is lost. The AC indicator
can help users recognize and repair accidental AC power losses themselves, without ser-
vice calls. UL requires back-up battery power of at least 4 hours. Short power outages
normally will not affect your system and do not require service from your security company.
[5] Viewing System Trouble + 5
Other system troubles are indicated by a blinking Trouble Indicator and beeping from the
keypad.Press or to silence the beeping. Press + 5 to view the cause of the
trouble condition. Call your security company to discuss the trouble condition and recom-
mended course of action. The trouble Indicator will remain lit until the trouble condition is
resolved.
5
Trouble
Note
Note
Note
Note
Note
The system’s clock needs to be reset.
See page 10 for instructions.
Telephone line or circuit trouble.
3 Bell Fault
4 Bus Failure
8 AC Failure
6 Real Time
Clock Loss
7 Telephone Line
Loss
5 Communication
Failure
Smoke Detector
Trouble
Zone LED
Trouble Cause
1 Low Battery
2 Box Tamper
System control box opened or damaged.
Battery voltage is below acceptable level.
Battery wiring trouble or broken fuse delate.
If there is no trouble on the system, a long beep sounds after + entry.
The security system was unable to report to the monitoring
company. Call your security company for service.
Trouble with smoke detector wiring.
Call security company for service.
#
Clear
Call security company for service
Call security company for service
Call security company for service
Fire LED
(Slow
blinking)
6