Each Quad Key
TM
button on your system represents Detection Areas of your
security system (doors, windows, garage, exterior, etc…) or Custom Arming
Modes (Away, Home, Night). By selecting the appropriate Quad Key
TM
and
pressing the button, users can easily select the level of security they desire.
If you would like to deselect a Quad Key
TM
before arming, press the key a
second time. Then, either select another Quad Key
TM
or press to reset the
system to it’s ‘Home’ Mode.
Quad Keys activate pre-
assigned zone groups or pre-
configured arming modes.
Turn on the security system by
selecting the appropriate
button and pressing ‘On’.
If your Quad Keys control Arming Modes, only one mode may be used at a time.
To shift from one mode to another, enter your code to disarm and then re-arm
with the mode you desire.
If your Quad Keys control Detection Areas, you may select more than one area
at a time. Additional areas can be added at anytime by pressing the appropriate
Quad Key
TM
button and pressing . To turn off detection areas, enter your
PIN number to turn-off all detection areas. Then select any areas you wish to
rearm and press .
Quad Keys
TM
Vision’s ‘Point & Click’ control makes operating your security system quick and
easy. For most day to day operations you can simply select the area you wish to
secure (A, B, C, or D) and press . If your security system is ‘On’ (armed),
entering a valid User PIN turns-off (disarm) the entire system. If the entry delay
buzzer is sounding during the disarming process, the button can be pressed
before your User PIN to temporarily silence the buzzer.
While this is all that’s necessary for day-to-day operation of your Vision Security
system, please read on to learn more about special features of your system and
familiarize yourself with operating instructions you might need during special
situations.
Basic Operation
#
Clear
3