Vision SB-900P, User Manual, Page: 9 / 10

9
1 During ON mode, press the SOURCE button
on the unit to select Bluetooth mode. The
Blue indicator will flash slowly.
2 Activate your Bluetooth device and select
the search mode. “ SB-900P ” will appear on
your Bluetooth device list.
- If you cannot find the soundbar, press and
hold the
BF
/ PAIR button on the unit. The
system has entered pairing mode. The unit'
Blue indicator will flash rapidly and prompt
“
Pairing
“.
3 Select “ SB-900P ” enter “0000” for the
password if necessary. The unit will voice
“
Paired ” and the Blue indicator will light up
solidly.
4 You can now play music from your
connected device.
- Press the
BF
/ PAIR button on the unit to
pause/resume play.
To disconnect the Bluetooth function:
- Switch to another function on the unit.
- Disable the function from your Bluetooth
device.The Bluetooth device will be
disconnected from the unit after the
“
Disconnected ” voice prompt.
- Press and hold the
BF
/ PAIR button on the
unit.
Tips:
- Enter "0000" for the password if necessary.
- If no other Bluetooth device pairs with this
player within two minutes, the player will
recover its previous connection.
- The player will also be disconnected
when your device is moved beyond the
operational range.
- If you want to reconnect your device to this
player, place it within the operational range.
- If the device is moved beyond the
operational range, when it is brought back,
please check if the device is still connected
to the player.
- If the connection is lost, follow the
instructions above to pair your device to the
player again.
Troubleshooting
To keep the warranty valid, never try to repair
the system yourself. If you encounter problems
when using this unit, check the following points
before requesting service.
No power
- Ensure that the AC cord of the apparatus is
properly connected .
- Ensure that there is power at the AC outlet.
- Press standby button to turn the unit on.
No sound
- Increase the volume. Press Volume Up on
the soundbar.
- Press source buttons to select a different
input source.
- If using Bluetooth, ensure that the volume
on your source device is turned up and that
the device is not muted.
I can’t find the Bluetooth name of
this unit on my Bluetooth device for
Bluetooth pairing
- Ensure the Bluetooth function is activated
on your Bluetooth device.
- Ensure you have paired the unit with your
Bluetooth device.
This is a 15 mins power off function, one
of the ERPII standard requirement for
saving power
- When the unit's external input signal
level is too low, the unit will be turned off
automatically in 15 minutes. Please increase
the volume level of your external device.