5
What’s in the Box
Main Unit x1
AC Power Cable x4
Wall Bracket x2
• Design and specifications are subject to
change without notice.
Specifications
Soundbar
Power Supply
AC 100-240V~ 50/60H
Output Power
15 W x 2
Power Consumption
30 W
< 0.5 W (Standby)
Frequency Response 40Hz - 20KHz
Audio input
sensitivity (AUX)
500mV
Speakers Impedance
8Ω x 2
Dimension
(W x H x D )
745 x 62 x 92 mm
Bluetooth
Version
V 4.2
Maximum power
transmitted
<5 dbm
Frequency bands
2402 MHz ~ 2480 MHz
FCC INFORMATION
(for US customers)
Warning:
- This equipment should be installed and
operated with minimum distance 20cm
between the radiator & your body.
- Changes or modifications to this unit not
expressly approved by the party responsible
for compliance could void the user ’s
authority to operate the equipment. ”
NOTE:
This equipment has been tested and
found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide
reasonable p r o te c t i o n a g a i n s t h a r m f u l
interference in a residential installation. This
equipment generates, uses and can radiate
radio frequency energy and, if not installed
and used in accordance with the instructions,
may cause harmful inter ference to radio
communications.
However, there is no guarantee that interference
will not occur in a particular installation. If this
equipment does cause harmful interference
to radio or television reception, which can be
determined by turning the equipment off and
on, the user is encouraged to try to correct the
interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
•
Increase the separation between the
equipment and receiver.
•
Connect the equipment into an outlet on
a circuit different from that to which the
receiver is connected.
•
Consult the dealer or an experienced radio /
TV technician for help.
This device complies with Part 15 of the FCC
Rules. Operation is subject to the following two
conditions:
(1) this device may not cause harmful
interference, and
(2) this device must accept any interference
received, including interference that may
cause undesired operation.