Vision SB-900P User Manual Download Page 4

4

Caution:

-   Use of controls or adjustments or performance 

of procedures other than those described 
herein, may result in hazardous radiation 
exposure or other unsafe operation.

-   To reduce the risk of fire or electric shock, do 

not expose this apparatus to rain or moisture. 
The apparatus must not be exposed to 
dripping or splashing and objects filled with 
liquids, such as vases, must not be placed on 
apparatus.

-   The mains plug/appliance coupler is used as 

the disconnect device, the disconnect device 
must remain readily operable.

-   Danger of explosion if battery is incorrectly 

replaced.

-   Replace only with the same or equivalent type.

Warning

•   Before operating this system, check the 

voltage of this system to see if it is identical 
to the voltage of your local power supply.

•   Do not place this unit close to strong 

magnetic fields.

•   Do not place this unit on the amplifier or 

receiver.

•   Do not place this unit close to damp areas 

as the moisture will affect the life of the laser 
head.

•   If any solid object or liquid falls into the 

system, unplug the system and have it 
checked by qualified personnel before 
operating it any further.

•   Do not attempt to clean the unit with 

chemical solvents as this may damage the 
finish. Use a clean, dry or slightly damp 
cloth.

•   When removing the power plug from the 

wall outlet, always pull directly on the plug, 
never yank on the cord.

•   Changes or modifications to this unit not 

expressly approved by the party responsible 
for compliance will void the user’s authority 
to operate the equipment.

•   The rating label is pasted on the bottom or 

back of the equipment.

Correct Disposal of this product. This 
marking indicates that this product 
should not be disposed with other 
household wastes throughout 
t h e  E U .  To  p r e v e n t  p o s s i b l e 

harm to the environment or human health 
from uncontrolled waste disposal, recycle it 
responsibly to promote the sustainable reuse of 
material resources. To return your used device, 
please use the return and collection systems 
or contact the retailer where the product was 
purchased. They can take this product for 
environmental safe recycling.

We hereby declares that this product is in 
compliance with the essential requirements and 
other relevant provisions of Directive 2014/53/
EU.

The Bluetooth word mark and logos are 
registered trademarks owned by Bluetooth SIG,. 
Inc.

Summary of Contents for SB-900P











Reviews: