Vision MAX Pro, User Manual

Page: 38 / 69

38
DATA BACKUP TO HARD DRIVE, ETC
DATA BACKUP TO HARD DRIVE, ETC
This is used to backup a large volume of images.
# 1 – Select the start and end time and date for the backup you wish to make.
# 2 – Click on this button to estimate the amount of space that your selected time backup will require.
The box below will appear with the estimated amount of space that is needed.
See the Center Software Manual for information on replaying Backup Data!
# 3 – Click on this button to select the media type you would like to use for the backup. You can
select from any available drive such as mapped network drive, zip, hard drive, etc. You can also
select a remote IP address that the system will backup to as shown below.
# 4 – Format CD-R/CD-RW – This button works with Roxio Direct CD to format a blank CD. Direct
CD must be installed on the system in order for this feature to work. (SEE Direct CD Section of the
manual)
# 5 – Placing a check in this box will delete the old backup data when there is not enough free space
to complete the backup.
# 6 – You can choose the priority of the backup here.
The backup icon will be displayed on the top of the screens while any backups are accruing.