Vision MAX Pro, User Manual

Page: 25 / 69

25
E
E
-
-
MAP
MAP
E-MAP allows you to display a maps of your facility on the display screen. You can have icons for
the installed cameras, sensors and control relays on the maps to indicate their position in your
facility.
# 1 – Use E-Map – Place a check in the box if you want to use the E-Map feature.
# 2 – Position No. – Select the screen division that you wish to add an E-Map to, then select the
position within that division that you wish to place a map on.
# 3 – User Image Copy - To add your own bitmap click on the “Find>>” button and locate the .bmp
file you wish to use. The bitmap name will be placed in the box. Click on “Go” to copy the image into
that position. The bitmap you wish to use should be in a resolution of 540x360 pixels for best results
# 4 - To add icons to the map select the item number you wish to add and choose a type from the
drop down list. Then click on the location of the item on the map. Click “Save” to accept your
changes.
• The E-Map will be displayed in the selected screen position. You can access each camera by
clicking on it’s icon, the cameras image will be displayed full screen and the pan tilt controls will be
shown if the camera is equipped with these features. The status of any sensors or control relays will
also be indicated on the map.
•Multiple E-Maps can be assigned to each screen division. To add another E-Map to the selected
screen division, repeat the above steps.