Vision Marathon + User Manual Download Page 23

Page: 23 / 26

Chapter 5. Bundled Software Installation Guide

5.1. Hardware Installation

1. Connect the male connector of UPSilon2000 cable to the UPS

communication port.

2. Connect the female connector of UPSilion 2000 cable to a dedicated

RS232 port. If there is only a DB25 connector of the RS232 port available,
you may use a DB9-DB25 adapter to convert it.

5.2. Software Installation

5.2.1. UPSilon2000 Installation

A. UPSilon2000 for Windows 95, 98, NT, 2000, XP

1.  From the Start Button, choose "Run".
2.  Type D:\Windows\Setup.exe
3.  Choose OK.

B. UPSilon2000 for Novell Netware V3.1x

1.  Login the File Server (with access rights in SYS: SYSTEM)
2.  Execute D:\Netware\V3.1x\Install.exe
3.  Re-boot System.

C. UPSilon2000 for Novell Netware V4.x

1.  Login the File Server (with access rights in SYS: SYSTEM)
2.  Execute D:\Netware\V4.x\Install.exe
3.  Re-boot System

D. UPSilon2000 for Novell Netware V5.x

1.  Login the File Server (with access rights in SYS: SYSTEM)
2.  Execute D:\Netware\V5.x\Install.exe
3.  Re-boot System

Summary of Contents for Marathon +



























Search results

Summary of Contents for Marathon +

Reviews:

Related manuals for Marathon +

Brands by name

Popular brands

Vision Marathon +, User Manual

Search results

Summary of Contents for Marathon +

Reviews:

Related manuals for Marathon +

Brands by name

Popular brands