www.visioneng.com/support
Ultra HD digital video inspection system
13
Figure 9: Double arm boom stand with clamp (S241)
Figure 10: Double arm boom stand with base (S242)
COMPONENTS
Double arm boom stand
(with clamp or base)
These stands attach directly to the Makrolite 4K camera in exactly the same way as the single arm stand (see
previous page) – no adaptors are required.
Bench stand
The S417 adaptor is required to attach the Makrolite 4K camera to the Bench stand.
Note. The microscope support,
pictured left supplied with the
bench and boom stands are not
required with Makrolite 4K.
Unscrew the incident light from
this support (2 screws) and
unscrew this support from the
stand (single screw).
Fitting the S417 adaptor
attach the adaptor bracket (part A in the image above right) to the stand (single screw)
attach the incident light to the bracket (two screws)
attach the adaptor plate (part B) to the interface plate on the Makrolite 4K using the two screw holes indicated in the
image above
attach the camera/adaptor plate (B) to the adaptor bracket (A) using the two screws holes indicated above.
Figure 13: S417 adaptor
Figure 11: Bench stand (S203 or S240)
Figure 12: Interface plate screw
holes for the S417 adaptor