www.visioneng.com/support
Ultra HD digital video inspection system
4
PREFACE
General
Safety
Before using your system for the first time, please read the Health & safety section of the user guide.
Ensure that:
Your system and accessories are operated, maintained and repaired by authorised and trained personnel only.
All operators have read, understood and observe the user manual, in particular the safety regulations.
Cleaning
Disconnect your system from the electrical source before cleaning.
Do not use any unsuitable cleaning agents, chemicals or techniques for cleaning.
Never use chemicals to clean coloured surfaces or accessories with rubberised parts.
Use a specialist lens cloth to clean optical surfaces.
Servicing
Repairs may only be carried out by Vision Engineering-trained service personnel. Only original Vision Engineering
spare parts may be used.
Symbols used
Warning!
A potential risk of danger exists. Failure to comply can cause i) a hazard to personnel; ii) instrument malfunction and damage.
Please consult the operating instructions provided with the product.
Warning of electrical shock hazard
This symbol indicates the presence of electric shock hazards. Please consult the operating instructions provided with the
product.
Important information
This symbol indicates important information. Please carefully follow the instructions or guidelines.
Health & safety
Unauthorised alterations to the instrument or non-compliant use shall invalidate all rights to any warranty claims.
Electrical safety
Disconnect your system from the electrical source before undertaking any maintenance.
Do not disconnect the power cable when the camera is on, or connect the power cable when the mains supply is on.
Avoid using any form of liquid near the system.
Do not operate your system with wet hands.
Illumination safety
Do not look directly at the illuminated LED’s. This may cause damage to the eyesight.