PAGE 03
OWNERS MANUAL - MONITOR SPECS & CAMERA ASSEMBLY
MONITOR
SPECS
Built-in
Recording
Yes (up to 128
GB SD Card)
Model
904
Aspect Ratio
Screen Size
Luminance
9 inches
16:9
500 cd/md2
Resolution
1024 x 600
Audio & Video
4 video/4
audio input
(dual channel
single image
display
Language
Mount Type
Multi-Language
U-Type
Sunshade
Removable
Voltage
12V-36V
System
PAL & NTSC
automatically
OSD Menu
Display Menu,
Brightness,
Color, Contrast
Adjustable
Set Up
Mirror for
individual image,
can set reserve
trigger delay in
settings
CAMERA
ASSEMBLY
Fig 1.
Fig 2.
Fig 3.
1 - Scew in the antenna provided into the back of the camera.
2 - Remove flat washer and nut on magnet assembly. Position and align
center hole of camera and bracket assembly on top of magnet.
3 - Install bolt from underside of magnet and secure with flat washer and
nut. Tighten this connection.
4 - Secure camera and set viewing angle with the four allen wrench bolts
(inside camera mounting hardware). You can always adjust your camera
viewing angle later.
Tip: Although the magnet contains 65lb pull force, we recommend mounting
your camera on a flat surface to minimize vibration. Sometimes a zip tie can
be used in addition to fasten the camera as a preventative measure in the
event the camera is knocked off.
TEMPORARY MOUNTING
For permanent mounting, it is recommended that you remove the magnet and
attach the camera bracket to any flat surface with the two truss head screws
provided in the kit (inside camera mounting hardware).
Secure camera and set viewing angle with the four allen wrench bolts (inside
camera mounting hardware). You can always adjust your camera viewing
angle later.
PERMANENT MOUNTING
Antenna
Magnet
Bolt Nut
Magnet Bolt
Magnet
Washer
Allen
Wrench Bolt
Allen
Wrench Bolt
Allen
Wrench
Bolt
Allen
Wrench
Bolt
Truss head
Screws
Allen
Wrench
Bolt
Allen
Wrench Bolt
Allen
Wrench
Bolt
Antenna
