4
4.2 Power Cable Connection Installation:
Connect other end of
VIDEO EXTENSION
CABLE
harness to
CAMERA
harness
cable. Again, ensure arrows are aligned on
outer jacket of cable ends. Turn silver
cable connector nut clockwise to secure
the connection of the cables. Do not
overtighten.
Ref. Fig.2
The
MAIN HARNESS
included in this kit contains two video cable inputs. The cable input labelled C2 can be
used to accept a video signal from a second optional camera. C2 imaging can be selected from the remote
(Video Select) or monitor (V1/V2) controls. It will also activate and provide a video feed to the monitor if
12VDC power is supplied to the GREEN wire on the
MAIN HARNESS
.
Note:
A common application for the C2 video feed is for rear view imaging when in reverse. For C2 video feed
for a reverse application, it is common to connect the GREEN wire to the reverse wire on the vehicle.
Ref. Fig.2
Included in kit is an
AV Accessory Cable
adaptor that will allow you to play videos from a DVD
player or alternate video source. It can be installed into C1 or C2 monitor inputs.
Cigarette Lighter Adapter - system can be powered by connecting the
MAIN HARNESS
CIGARETTE
LIGHTER INPUT to the mating connector of the
CIGARETTE LIGHTER ADAPTER
. The cigarette lighter
adapter can now be installed into a 12VDC power source. To verify that the system is receiving power, cup
your hands over the camera lens, and the LED lights will have a red glow. Ref. Fig.2
