2
Main Harness
Quantity 1
Video Extension
Cable (30ft)
Quantity 1
Cigarette Lighter
Adapter
Quantity 1
AV Accessory Cable
Quantity 1
Remote Control
(CR2025 battery
included)
Quantity 1
3.0 Assembly Instructions
Camera can be mounted using magnet and attaching hardware. These are the steps required to attach the
magnet to the camera.
1. Position and align center hole of camera and bracket assembly on top of magnet.
2. Install bolt from underside of magnet and secure with flat washer and nut. Tighten this connection.
Tip: Although magnet contains 65lb pull force, it we recommend mounting your camera on a flat surface, and a zip
tie be used in addition to fasten the camera as a preventative measure in the event the camera is knocked off.
